{"title":"Primal Monster Truck","description":"\u003cp\u003eAll your favorite upgrades for the Primal Monster Truck\u003c\/p\u003e","products":[{"product_id":"grave-digger-custom-taylor-71-supreme-package","title":"GRAVE DIGGER Custom TAYLOR 71 Supreme Package (in stock ready to ship)","description":"\u003cp\u003e\u003cstrong\u003ePlease note all Big Block engines are built to order, expect circa 7 - 14 days for shipment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComplete ready to fit 71 Supreme Engine package Primal RC GRAVE DIGGER Monster Jam Trucks\u003c\/p\u003e\n\u003cp\u003eThis one is custom anodized green and purple to match the Grave Digger colors\u003c\/p\u003e\n\u003cp\u003eThis engine will provide you with 3-4 times the power of stock Primal engine but not quite the gear shattering torque of the 80 SUPREME for those concerned about improved drivetrain reliability.\u003c\/p\u003e\n\u003cp\u003eThe package includes the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e71cc Billet Reed engine (47.6mm Bore x 39.6mm Stroke) (Custom Green Splash Anodized)\u003c\/li\u003e\n\u003cli\u003eTAYLOR SUPREME CYLINDER \u003c\/li\u003e\n\u003cli\u003eCustom Purple Billet cylinder head\u003c\/li\u003e\n\u003cli\u003e78mm 3-Shoe GO-PED CLUTCH SYSTEM\u003c\/li\u003e\n\u003cli\u003eFits straight onto the stock Ram Clutch bell housing and transmission for easy swap.\u003c\/li\u003e\n\u003cli\u003eOppama Japanese Ignition System\u003c\/li\u003e\n\u003cli\u003eTAYLOR BILLET HD PULL STARTER\u003c\/li\u003e\n\u003cli\u003eTAYLOR Reed System with 8 custom high tension carbon-fibre petals.\u003c\/li\u003e\n\u003cli\u003eFitted as standard with the WJ146 Big bore carb\u003c\/li\u003e\n\u003cli\u003eRAM AIR Dual layer foam filter\u003c\/li\u003e\n\u003cli\u003eTAYLOR BIG BORE RAMINATOR EXHAUST and fitting kit.\u003c\/li\u003e\n\u003cli\u003eCustom Throttle cable linkage bracket\u003c\/li\u003e\n\u003cli\u003eCustom Billet RH and LH engine brackets to replace stock engine brackets.\u003c\/li\u003e\n\u003cli\u003eThe famous TAYLOR Official Hat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTHE 71 FITS ALMOST THE SAME AS OUR 80cc MONSTER, JUST WITHOUT THE NEED TO CHANGE TRANNY, SEE INSTALL VIDEO HERE: https:\/\/youtu.be\/97yjgpOPBf0\u003c\/p\u003e\n\u003cp\u003eFitment into the primal raminator is fairly straightforward. Once you have removed the stock engine and pipe, also remove the centre top cross over link bar between the two side chassis plates.\u003c\/p\u003e\n\u003cp\u003eWhile the stock engine is out, we highly recommend cutting out a section of the side chassis plate next to the pull starter so that you can fit the engine (or even the stock engine) Without having to remove the pull starter or remove the side chassis plate itself. (see photo above with section cut out around the pull starter).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThen the engine itself can drop in and bolt up with the supplied engine brackets (fitment shown in pics).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs mentioned above, if you cut your chassis it will drop in, if not, remove the pull start side chassis plate and then there is room to fit. Fit all the engine mounting bolts supplied. Next you can hook up the throttle linkage cable onto the big bore WJ146 carb. Simply remove the linkage cable hole from the stock carb by popping the bracket off and removing the E clip. Then put this piece onto the Hole cut out in the WJ146 Carb arm as shown in photos.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFinally you can fit the cable to the supplied holder bracket and adjust to suit. (again see photos) The last step is to fit the exhaust mounting bracket to the car ready to support the pipe. (the main belly section of the pipe fits to the car AFTER the body has been fitted - slide in through the gap at back of the roll over bar and into place). Then its as simple as two retaining springs and the one nut on the rubber mount!\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660602310837,"sku":"TAY1802-04","price":2499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/taylor-rc-71-supreme-custom-grave-digger-engine-color-raminator-mt-engine.jpg?v=1757019928"},{"product_id":"taylor-primal-monster-truck-diff-cross-pins-2","title":"Taylor Primal Monster Truck Titanium Diff Cross Pins (2)","description":"\u003cp\u003eHD Titanium Titanium Grade 5 (Ti6AL4V) precision machined Cross pins for all Primal Monster Truck Model Differentials!\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660645466293,"sku":"TAY8020","price":14.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_d49f6604-97b2-4f12-8dfa-ae10fd9ce936.jpg?v=1757020641"},{"product_id":"galante-hd-limit-straps-for-primal-monster-trucks","title":"Galante HD limit straps for Primal Monster Trucks","description":"\u003cp\u003eThis kit is designed for Primal Raminator- all models\u003c\/p\u003e\n\u003cp\u003eThe best limit straps in the business. HD Galante shock straps. These straps are fully adjustable and double stitched for strength with a breaking strength of 1400lbs. Bonehead buckles for added strength. These straps have specially designed and machined 6061 aluminum mounting bolts for ease of installation. your choice of 3 different colors\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded with kit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQty 4 Shock Mounts Mounts (6mm thread)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQty 4 3\/8 bonehead HD buckles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQty 4 Straps (Choose your color) 3\/8 Nylon Strap\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhat do limiting Straps do?\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003estrap limits the overall travel of the shock to your preset length .\u003c\/li\u003e\n\u003cli\u003ePrevents shock from overextending that could cause shock damage.\u003c\/li\u003e\n\u003cli\u003ePrevents the droop screw from hitting the chassis causing damage\u003c\/li\u003e\n\u003cli\u003eHelps to reduce the A-arms from bowing\/braking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese will mount on the extra hole placed in the side of the chassis or there is enough extra to mount directly to the shock stand off if desireable.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Galante","offers":[{"title":"Black","offer_id":51707263778997,"sku":null,"price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_248623ad-aadf-4ea7-804d-c32e50d14cde.jpg?v=1757020799"},{"product_id":"agfrc-brushless-125kg-billet-4s-16-8v-servo","title":"AGFRC Brushless 125KG Billet 4S 16.8V Servo [A280BVSW]","description":"\u003cp\u003e\u003cstrong\u003eAGFRC 125KG Mega Torque 16V 4S LiPo IP67 Waterproof 0.080Sec High Speed Programmable Magnetic Angel Sensor Steel Gears Brushless Digital Servo for 1\/5 Giant Scale RC Models (A280BVSW)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003eThe A280BVSW is the most powerful large size 1\/5 servo from AGFRC. It combines long-life brushless motor with monster torque design takes the driving experience of large model enthusiasts to a new level. A280BVSW servo is ideal for 1\/5 Monster Truck, Buggy, Crawler, Large Airplanes, Robot Arm, etc. Whether you are traversing the jungle or climbing over sand dunes, 5 ball bearings and strengthening gear struture improve the crashworthiness and life of the servo.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWith IP67 rated waterproofing the all metal construction is powered by a 3S or 4S battery. The black anodized case is accented with silver machined accents and laser engraving. The steel geared drivetrain is supported with five ball bearings. This is the most powerful servo we offer in our store and is suggested for the heaviest and most powerful builds. With the requirements of higher voltage you will need to use a separate battery pack and BEC for gas models. With electric models you will need to check the ESC output voltage and amp rate. This servo works very well with a direct power system common on platforms like the SCX6.\u003c\/p\u003e\n\u003cp\u003eThis is fully programmable with the AGFRC V3 Servo Programmer. \u003cspan\u003eAGFRC Servos are industry leading performers which makes them a popular choice for OEM sourcing. Skip the markup and get the best servos at the best price.\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\"Servo Neutral\" function of AGFRC A280 Series 5th scale servos are not available to program\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSanwa compatibility: A280 Series servos is compatible with Sanwa SHR Mode only\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AGFRC","offers":[{"title":"Default Title","offer_id":51660682690741,"sku":"AGFA280BVSW","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/agfrc-a280bvsw-high-voltage-16s-125kg-brushless-servo.jpg?v=1757021369"},{"product_id":"agfrc-brushless-100kg-billet-servo","title":"AGFRC Brushless 100KG Billet Servo - A280BHLW","description":"\u003cp\u003e\u003cstrong\u003eAGFRC 100KG Mega Torque 2S LiPo IP67 Waterproof 0.110Sec Programmable Steel Gears Brushless Digital Servo for 1\/5 Giant Scale RC Models (A280BHLW)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the all-torque no compromise servo of choice for heavy 4WD builds and the Primal RC Raminator. Built with the same architecture as the A280BHMW 78kg servo this model favors torque over speed with a monster 100kg (1390 oz) powered by common 2S LiPo.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHoused in the all metal CNC machined case is a full steel gear drivetrain supported with five ball bearings for durability and precision. The IP67 rated waterproofing means that all elements can be tackled. Further customization to your system can be completed with the AGFRC SPV3 Servo Programmer.\u003c\/p\u003e\n\u003cp\u003eIncluded are two 7075 billet servo horns; a single sided and double sided make this ready to fit in your favorite 1\/5 models. With a similar footprint to other large scale servos this is a direct fit to your favorite cars from Kraken, Losi, MCD, Rovan\/KM and more.\u003c\/p\u003e\n\u003cp\u003eView Kevin Talbot on YouTube testing these servos in his electric converted Raminator here:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/WZ89TQRCmk4?si=0LMCtyOTZt-V4Kzc\u0026amp;start=882\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAGFRC Servos are industry leading performers which makes them a popular choice for OEM sourcing. Skip the markup and get the best servos at the best price.\u003c\/span\u003e\u003c\/p\u003e","brand":"AGFRC","offers":[{"title":"Default Title","offer_id":51660682723509,"sku":"AGFA280BHLW","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/agfrc-a280bhlw-brushless-digital-alumimum-waterproof-servo-100kg.jpg?v=1757021372"},{"product_id":"2mm-titanium-alloy-body-clips-set-of-10","title":"Titanium Alloy Body Clips (Set of 10)","description":"\u003cp\u003eCheck out these absolutely beautiful Genuine Titanium Alloy Body clips for all RCs that need 2mm Clips!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eLike Losi 5T all round, Kraken, Primal, etc and many other cars that use \"normal\" largescale 2mm wire clips\u003c\/p\u003e","brand":"TZZ Racing","offers":[{"title":"1.5mm","offer_id":51660685705397,"sku":"TZZ001506","price":8.9,"currency_code":"USD","in_stock":false},{"title":"2mm","offer_id":51660685738165,"sku":"TZZ002006","price":9.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_e80bff19-115a-4a2f-99d5-fbdfd1d897fc.jpg?v=1757021396"},{"product_id":"primal-monster-truck-johnny-crash-go-kart-wheel-hubs-4","title":"Johnny Crash Go Kart Wheel Hubs for Primal Monster Truck (4)","description":"\u003cul\u003e\n\u003cli\u003eSet of four (4) in a kit.\u003c\/li\u003e\n\u003cli\u003e2 inch offset each side, 4 inches offset overall\u003c\/li\u003e\n\u003cli\u003eTo suit Metric Go Kart Wheels\u003c\/li\u003e\n\u003cli\u003eClamps on to axle shaft\u003c\/li\u003e\n\u003cli\u003eMade from Aluminium 6061\u003c\/li\u003e\n\u003cli\u003eAustralian made.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johnny Crash Racing","offers":[{"title":"Default Title","offer_id":51660740591797,"sku":"JCR8080","price":174.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/file_ddca365b-3fce-49df-b5ce-4ffb7b5cc956.jpg?v=1757023051"},{"product_id":"taylor-hd-v3-f-r-synchronizer-shaft-prrmt159","title":"TAYLOR HD V3\/V4 F\/R Synchronizer Shaft (PRRMT159)","description":"\u003cp\u003eThis new Extremely heavy Duty V3 F\/R sync shaft is machined from EN24T\/300M Material for maximum strength and durability!\u003c\/p\u003e\n\u003cp\u003eFits all V3 onwards Primal monster trucks (and V1\/V2 trucks if they also buy the V3 Sync hub\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660741247157,"sku":"TAYPRRMT159","price":35.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/TAYLORHDV3FRSynchronizerShaft_PRRMT159.jpg?v=1757023088"},{"product_id":"primal-mt-cy46cc-billet-air-filter-mount","title":"PRIMAL MT CY46cc Billet Air Filter Mount","description":"\u003cp\u003eSuper handy Billet ait intake for Raminator, Grave Digger etc builds using a CY 460 engine. (or any other engine that has a similar carb angle and want to have a downwards intake.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660741378229,"sku":"TAY8040","price":62.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/file_ae3ec59e-4655-4547-b212-a3548a0bba3d.jpg?v=1757023097"},{"product_id":"high-flow-rc-fuel-line-1-foot-length","title":"High Flow RC Fuel Line  - 1 Foot Length","description":"\u003cp\u003eQuality High Flow Fuel line made in the USA.   This is sold by the foot.  Please select the color and length desired.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurometer:\u003c\/strong\u003e 85A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOD:\u003c\/strong\u003e .250 or 1\/4 or 6.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Polyurethane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID:\u003c\/strong\u003e .125 or 1\/8 or 3.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Pressure at 75:\u003c\/strong\u003e 145 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Pressure at 150:\u003c\/strong\u003e 60 PSI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Detroit Performance RC","offers":[{"title":"Clear","offer_id":51660742131893,"sku":"DPRHFL001CL","price":1.0,"currency_code":"USD","in_stock":true},{"title":"black","offer_id":51660742164661,"sku":"DPRHFL001BK","price":1.0,"currency_code":"USD","in_stock":true},{"title":"Transparent Orange","offer_id":51660742197429,"sku":"DPRHFL001TO","price":1.0,"currency_code":"USD","in_stock":true},{"title":"Transparent Red","offer_id":51660742230197,"sku":"DPRHFL001TR","price":1.0,"currency_code":"USD","in_stock":true},{"title":"Transparent Green","offer_id":51660742262965,"sku":"DPRHFL001TG","price":1.0,"currency_code":"USD","in_stock":true},{"title":"Transparent blue","offer_id":51660742295733,"sku":"DPRHFL001TB","price":1.0,"currency_code":"USD","in_stock":true},{"title":"Transparent yellow","offer_id":51660742328501,"sku":"DPRHFL001TY","price":1.0,"currency_code":"USD","in_stock":true},{"title":"blue","offer_id":51660742361269,"sku":"DPRHFL001BL","price":1.0,"currency_code":"USD","in_stock":true},{"title":"red","offer_id":51660742394037,"sku":"DPRHFL001R","price":1.0,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":51843955196085,"sku":null,"price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/High_Flow_Fuel_Line_transparent_colors_1.jpg?v=1759846169"},{"product_id":"jt-bearing-1-5-million-cst-premium-diff-oil","title":"JT bearing 1.5 Million CST premium Diff Oil","description":"\u003cp\u003eThe most consistent RC diff oil money can buy! Here are the reasons why.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMade in the USA in controlled conditions\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e100% Silicone Oil\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLaboratory Tested and Certified Cst Ratings\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JOT Bearing","offers":[{"title":"Default Title","offer_id":51660747178165,"sku":"JTB1021","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/JTbearing1MillionCSTpremiumDiffOil_1_150930ae-70da-46eb-a2fa-ad5e29533382.jpg?v=1757023312"},{"product_id":"jt-bearing-2-million-cst-premium-diff-oil","title":"JT bearing 2 Million CST premium Diff Oil","description":"\u003cp\u003eThe most consistent RC diff oil money can buy! Here are the reasons why.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMade in the USA in controlled conditions\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e100% Silicone Oil\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLaboratory Tested and Certified Cst Ratings\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JOT Bearing","offers":[{"title":"Default Title","offer_id":51660747997365,"sku":"JTB1022","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/JTbearing1MillionCSTpremiumDiffOil_1_00db7fd9-6879-4e8b-8cc0-b61d349b6d37.jpg?v=1757023325"},{"product_id":"jt-bearing-1-million-cst-premium-diff-oil","title":"JT bearing 1 Million CST premium Diff Oil","description":"\u003cp\u003eThe most consistent RC diff oil money can buy! Here are the reasons why.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eMade in the USA in controlled conditions\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e100% Silicone Oil\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLaboratory Tested and Certified Cst Ratings\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JOT Bearing","offers":[{"title":"Default Title","offer_id":51660748062901,"sku":"JTB1020","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/JTbearing1MillionCSTpremiumDiffOil_1.jpg?v=1757023327"},{"product_id":"taylor-premium-threadlock-10ml-medium-strength","title":"TAYLOR Premium Threadlock 10ml - Medium Strength","description":"\u003cp\u003eThis high quality, British Made threadlocker is the best we have found, so much so that we arranged a bulk deal and had our brand proudly attached to it!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eSupplied in a handy 10ml bottle with precise applicator nozzle.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe use this threadlock for all our personal and pro builds since coming across it. at under £5 its great value, considering the quality and vibration resistance over time, which is essential for RC.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003ePretty much a perfect strength blend for all applications across your rig in that it holds fast even when oil is present, but not too strong that you round bolts when removing.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660750880949,"sku":"TAY2096","price":6.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_8174a24a-9d27-4d03-bdd8-548d36f56ed5.jpg?v=1757023407"},{"product_id":"taylor-upgraded-ram-diff-output-cups-2","title":"TAYLOR Upgraded Primal MT V1\/V2\/V3 Diff output Cups (2)","description":"\u003cp\u003eThe Ultimate Drive cups for your Primal RC Raminator (all ages) and Mega Trucks. Direct replacement for PRRMT157 and PRRMT051.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThese cups have been torture tested by a number of hard users on 46\/50\/71 and 80cc engines. Solves the issues with stock cups which break at the stem.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eMachined from EN24T Motorsport Driveshaft Steel (300M equivilent) for the ulimate in strength.\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660751110325,"sku":"TAY8021","price":35.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_55204310-c3da-4089-aefc-6d0e23b4d5da.jpg?v=1757023413"},{"product_id":"taylor-primal-monster-truck-beadlock-set-4pcs","title":"TAYLOR Primal Monster Truck Beadlock Set (4pcs)","description":"\u003cp\u003eA full set of 4 Heavy Duty Billet Beadlocks precision machined from 6082 by TAYLOR.\u003c\/p\u003e\n\u003cp\u003eThis new V3 design has been anodised black and then face polished to give highlights\u003c\/p\u003e\n\u003cp\u003eThese stunning upgrades not only add incredible style to your truck but also provide enhanced clamping force to the tyre which will not flex like plastic beadlocks!\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660751143093,"sku":"TAY8070","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_6e4e09ba-775d-479d-9d4f-a455243634ca.jpg?v=1757023415"},{"product_id":"js-raminator-billet-rear-upper-side-body-mounts-2","title":"JS Raminator Billet Rear Upper Side Body Mounts (2)","description":"\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\u003cdiv\u003e\n\u003cp\u003eNew V2 batch, now made to a much better machining finish by TAYLOR RC on behalf of JS Performance. CNC Machined from 6082 billet alloy to a precise direct replacement fit. These are not a die cast and machined lightweight alloy part.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThe stock plastic body mounts have proved a significant week point, our solid alloy replacement mounts eliminate this adding significant strength and stunning looks. \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThese fit V1, V2, V3 Raminators, the Mega Truck and the Grave Digger.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e\u003c\/div\u003e","brand":"JS Performance","offers":[{"title":"Default Title","offer_id":51660751569077,"sku":"JSP8084","price":47.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_ef0db8b6-defe-4559-8c81-601141096c2c.jpg?v=1757023433"},{"product_id":"js-raminator-billet-rear-centre-side-body-mounts-2","title":"JS Raminator Billet Rear Centre Side Body Mounts (2)","description":"\u003cp\u003eNew V2 batch, now made to a much better machining finish by TAYLOR RC on behalf of JS Performance. CNC Machined from 6082 billet alloy to a precise direct replacement fit. These are not a die cast and machined lightweight alloy part.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe stock plastic body mounts have proved a significant week point, our solid alloy replacement mounts eliminate this adding significant strength and stunning looks. \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThese fit V1, V2, V3 Raminators, the Mega Truck and the Grave Digger.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"JS Performance","offers":[{"title":"Default Title","offer_id":51660751601845,"sku":"JSP8083","price":33.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_2a0d8c00-7803-4518-a39a-6c709567671e.jpg?v=1757023435"},{"product_id":"js-raminator-billet-front-centre-side-body-mounts-2","title":"JS Raminator Billet Front Centre Side Body Mounts (2)","description":"\u003cp\u003eNew V2 batch, now made to a much better machining finish by TAYLOR RC on behalf of JS Performance. CNC Machined from 6082 billet alloy to a precise direct replacement fit. These are not a die cast and machined lightweight alloy part.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThe stock plastic body mounts have proved a significant week point, our solid alloy replacement mounts eliminate this adding significant strength and stunning looks. \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eThese fit V1, V2, V3 Raminators, the Mega Truck and the Grave Digger.\u003c\/p\u003e","brand":"JS Performance","offers":[{"title":"Default Title","offer_id":51660751634613,"sku":"JSP8082","price":33.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_f43e7fd9-09bd-41a9-9d50-580f0eae4d93.jpg?v=1757023437"},{"product_id":"taylor-billet-raminator-fuel-gas-cap","title":"TAYLOR Billet Primal Monster Truck and Challenger Fuel Gas Cap","description":"\u003cp\u003eSweet little bling upgrade to suit your Primal Raminator or Mega Truck (V1\/V2\/V3 etc)\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTHIS CAP HAS A THREAD TO SUIT \u003cu\u003eRAMINATORS ONLY\u003c\/u\u003e, FOR LOSI\/BAJA\/KRAKEN\u003c\/strong\u003e, See Other listing\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660752486581,"sku":"TAY8030","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_fe4d6d3e-eb4a-4660-8d7c-2c34a22df30d.jpg?v=1757023468"},{"product_id":"primal-mt-titanium-front-gearbox-shaft","title":"Taylor PRIMAL MT Titanium Front Gearbox Shaft","description":"\u003cp\u003eAn Upgraded Heavy Duty Titanium Front Gearbox to Front Axle Shaft to suit all ages of Primal Raminator Monster Trucks   \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eReplaces: Raminator Monster Truck Gear Box To Front Axle Output Shaft (Part number: PRRMT067)\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660754419893,"sku":"TAY8022","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_f438a2e7-13ea-4aaa-840a-5efb2cf04591.jpg?v=1757023482"},{"product_id":"primal-mt-titanium-rear-gearbox-shaft","title":"Taylor RC PRIMAL MT Titanium Rear Gearbox Shaft","description":"\u003cp\u003eAn Upgraded Heavy Duty Titanium Rear Gearbox Shaft to suit all ages of Primal Raminator Monster Trucks\u003c\/p\u003e\n\u003cp\u003eReplaces: Raminator Monster Truck Rear Transmission Output Shaft (Part number: PRRMT066)\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660754583733,"sku":"TAY8024","price":44.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_cc95ba20-5b44-43fc-a208-d3e16ee3d448.jpg?v=1757023484"},{"product_id":"primal-v3-v4-monster-truck-titanium-shock-mount-kit","title":"Taylor RC PRIMAL V3\/V4 Monster Truck Titanium Shock Mount Kit","description":"\u003cp\u003eCheck out these sweet Upgraded HD Titanium suspension mounts to suit all V3 and V4 Monster Trucks. Also a great upgrade for anyone converting their V1 and V2 Trucks over to the new V3 or V4 Mega Shocks!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eAlso includes Upgraded 12.9 BZP Bottom shock mounting hardware in case your using this kit to mount an extra complete set of shocks to your Truck.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eAs we have seen, the new heavier and stronger shocks now pass the load in heavy impacts onto the supension mounts, these titanium pieces will solve the issue and keep you bashing.\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660755009717,"sku":"TAY8012","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/PRIMALV3V4MonsterTruckTitaniumShockMountKit_2.jpg?v=1757023486"},{"product_id":"rpm-tachometer-trail-tech","title":"Trail Tech Engine RPM Tachometer","description":"\u003cp\u003eNew Design Front Button TTO is a digital tachometer and hour meter that works on all gasoline engines (INCL 5TH SCALES)\u003cbr\u003e\u003cbr\u003eThe number of hours an engine has been running is critical to its maintenance schedule. Attach one to your motorcycle, ATV or lawn-mower and be aware of upcoming service requirements.\u003cbr\u003e\u003cbr\u003eTTO is the smallest available meter at 50x25x14mm and has large, easy to read digits. Easily mount it to any surface using either the bolt-on (Screws not included) or peel-n-stick mounting options.\u003c\/p\u003e","brand":"DPRC Other","offers":[{"title":"Default Title","offer_id":51660756713653,"sku":"TTO742A00","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/RPMTachometer-TrailTech.jpg?v=1757023502"},{"product_id":"sky-rc-performance-data-analyzer-gsm020","title":"SKY RC Performance Data Analyzer - GSM020","description":"\u003cp\u003e\u003cu\u003e\u003cem\u003eSKY RC Performance Data Analyzer. Part No. SK-500023\u003c\/em\u003e\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003eHow many times have your buddies mocked you after you were bragging that your RC machine goes over 100-blah-blah mph? We're betting too many times. So we now present you with the way to \u003cstrong\u003e\u003cu\u003eprove\u003c\/u\u003e\u003c\/strong\u003e that your RC car or plane actually is the fastest on Earth.\u003c\/p\u003e\u003cp\u003eWe present the app-enabled GNSS Performance Analyzer in an affordable and compact design. RC gurus now have a cutting edge gauge to measure the overall performance of your RC products accurately. Just pair the app on your smartphone, strap it to your car, and track your speed. You can mount to almost any RC vehicle, and it does a lot more than just display speed.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTo tell the truth before and after modifications.\u003c\/strong\u003e\u003cbr\u003eKnowledge is power! By knowing the facts before and after modifications, your efforts will not be in vain. GNSS Performance Meter will help you make sense of the improvements and help you make educated decisions to make sure you’re not spinning your wheels. For everyone trying to gauge their performance, here's an affordable way to do just that. Just got some new mods installed? Get some real feedback, really quickly. This is a professional-grade instrument accessible to enthusiasts. It’s every modeler’s dream. Enjoy!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImproved accuracy by tracking two satellite constellations\u003c\/strong\u003e\u003cbr\u003eThe GNSS Performance Analyzer supports GNSS(Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will definitely improve positional accuracy by tracking two satellite constellations instead of just GPS.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSmall but Versatile\u003c\/strong\u003e\u003cbr\u003eGNSS Performance Analyzer（GSM020) allows you to measure and analyze many aspects of your RC car \u0026amp; airplane’s performance using the latest GNSS engine (GPS, GLONASS) which gives you Acceleration, G-force, Speed, Time, Distance, High and Vertical Velocity. With its compact dimension of 40mm x 40mm x 17mm and internal antenna, it is an ideal choice for mounting on RC vehicles \u0026amp; airplanes.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePeace of mind with built-in liPo battery\u003c\/strong\u003e\u003cbr\u003eThe 5 hours' up-time on the built-in rechargeable LiPo battery can give enough racing time to RC drivers or pilots in the field! With the micro USB C charging port, it is very convenient to connect it to a USB port or another compatible USB power source for charging.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVisual LED indicator\u003c\/strong\u003e\u003cbr\u003eThe GNSS Analyzer is equipped with 3 LED indicators, signaling different operating modes. Open GNSS PA on the smartphone, the analyzer’s Bluetooth icon will stay steady blue, reflecting the device is connected; the satellite icon will stay steady green after a while of successful GNSS signal acquisition.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-in 1M Memory\u003c\/strong\u003e\u003cbr\u003eThe built-in 1M memory can record up to 50 records. And all the data can be transferred to the smartphone for analyzing! When the Flash is full, the previous record will be replaced automatically. Now you don't have to think about clearing data all the time or worry about missing the critical tracking data when the memory is full.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSupport both Metric and Imperial system of Measurement\u003c\/strong\u003e\u003cbr\u003eThe Metric and Imperial systems can be switched easily by the App!\u003cbr\u003eW40 x L42 x D18mm\u003cbr\u003eWeight - 37g\u003cbr\u003eIncludes USB charge cable.\u003c\/p\u003e","brand":"Schumacher Racing","offers":[{"title":"Default Title","offer_id":51660758548661,"sku":"SK-500023","price":93.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/SKYRCPerformanceDataAnalyzer-GSM020.jpg?v=1757023506"},{"product_id":"taylor-titanium-primal-monster-truck-steering-post","title":"TAYLOR Titanium Primal Monster Truck Steering Post","description":"\u003cp\u003eThis set of Ultra lightweight yet very strong steering post has been precision machined from a bar of Grade 5 Titanium Alloy.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFits V1\/V2\/V3\/V4 Trucks of all types\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFor trucks with rear steer, please order 2pcs\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eSupplied with 10.9 strength zinc coated fitting hardware.\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660759007413,"sku":"TAY8000","price":21.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_b2af9b39-4307-435f-8c9c-eb0461e3bc8e.jpg?v=1757023510"},{"product_id":"primal-mt-taylor-71-supreme-package","title":"PRIMAL MT TAYLOR 71 Supreme Package","description":"\u003cp\u003e\u003cstrong\u003ePlease note all Big Block engines are built to order, expect circa 7 - 14 days for shipment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComplete ready to fit package for the PRIMAL RC RAMINATOR, Grave Digger and MEGA Monster Truck!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis engine will provide you with 4-5 times the power of stock raminator engine but not quite the gear shattering torque of the 80 SUPREME for those concerned about drivetrain reliability.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCustom Anodising is available in all colours and even Dual Colour Splash anodising! Please just get in touch after placing an order to discuss.​\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eThe package includes the following:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e71cc Billet Reed engine\u003c\/li\u003e\n\u003cli\u003eTAYLOR SUPREME CYLINDER\u003c\/li\u003e\n\u003cli\u003e78mm 3-Shoe GO-PED CLUTCH SYSTEM\u003c\/li\u003e\n\u003cli\u003eFits straight onto the stock Ram Clutch bell housing and transmission for easy swap.\u003c\/li\u003e\n\u003cli\u003eOppama Japanese Ignition System\u003c\/li\u003e\n\u003cli\u003eTAYLOR BILLET HD PULL STARTER\u003c\/li\u003e\n\u003cli\u003eTAYLOR Reed System with 8 custom high tension carbon-fibre petals.\u003c\/li\u003e\n\u003cli\u003eWalbro WJ146 Carb\u003c\/li\u003e\n\u003cli\u003eRAM AIR Dual layer foam filter\u003c\/li\u003e\n\u003cli\u003eTAYLOR BIG BORE RAMINATOR EXHAUST and fitting kit.\u003c\/li\u003e\n\u003cli\u003eCustom Throttle cable linkage bracket\u003c\/li\u003e\n\u003cli\u003eCustom Billet RH and LH engine brackets to replace stock engine brackets.\u003c\/li\u003e\n\u003cli\u003eThe famous TAYLOR Official Hat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTHE 50 FITS ALMOST THE SAME AS OUR 80cc MONSTER, JUST WITHOUT THE NEED TO CHANGE TRANNY, SEE INSTALL VIDEO HERE: https:\/\/youtu.be\/97yjgpOPBf0\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFitment into the primal raminator is fairly straightforward. Once you have removed the stock engine and pipe, also remove the centre top cross over link bar between the two side chassis plates.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWhile the stock engine is out, we highly recommend cutting out a section of the side chassis plate next to the pull starter so that you can fit the engine (or even the stock engine) Without having to remove the pull starter or remove the side chassis plate itself. (see photo above with section cut out around the pull starter).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThen the engine itself can drop in and bolt up with the supplied engine brackets (fitment shown in pics).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAs mentioned above, if you cut your chassis it will drop in, if not, remove the pull start side chassis plate and then there is room to fit. Fit all the engine mounting bolts supplied. Next you can hook up the throttle linkage cable onto the big bore WJ71 carb. Simply remove the linkage cable hole from the stock carb by popping the bracket off and removing the E clip. Then put this piece onto the Hole cut out in the WJ71 Carb arm as shown in photos.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFinally you can fit the cable to the supplied holder bracket and adjust to suit. (again see photos) The last step is to fit the exhaust mounting bracket to the car ready to support the pipe. (the main belly section of the pipe fits to the car AFTER the body has been fitted - slide in through the gap at back of the roll over bar and into place). Then its as simple as two retaining springs and the one nut on the rubber mount!\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"V1 Straight Pipe (Grave Digger)","offer_id":51660770476213,"sku":"TAY1802-01","price":2345.0,"currency_code":"USD","in_stock":false},{"title":"V2 in-cab Pipe (Ram\/Mega truck etc)","offer_id":51660770508981,"sku":"TAY1802-02","price":2345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_f5dc504d-c92a-4bf5-a168-105e024a5d93.jpg?v=1757023567"},{"product_id":"agfrc-40kg-ram-throttle-reverse-servo","title":"AGFRC 40KG Ram Throttle+ Reverse servo","description":"\u003cp\u003eThe Ultimate Raminator Throttle or Reverse Servo has finally arrived from AGFRC! Fully waterproof, 40KG of torque and peak of 0.085secs speed, it's a little monster!\u003c\/p\u003e\n\u003cp\u003eThe A80BHMW V2 super torque waterproof steel gear digital servo will be a great option which support to use with high voltage and damp situation. A80BHMW V2 servo make almost 500oz-in torque with speed 0.11sec at 7.4V. While using voltage up to 8.4V, it can deliver 555oz-in super torque and 0.085sec high speed at 8.4V.\u003c\/p\u003e\n\u003cp\u003eThis is a \u003cstrong\u003e\"standard\" sized\u003c\/strong\u003e servo. This servo can will be a great choice for use in scale crawlers, 1\/10 monster truck, 1\/10 2WD and 4WD buggies and trucks. In addition, this A80BHMW V2 is great choice for boats and other application which require high power, high voltage and waterproof servo. Here at Taylor RC we often suggest this servo be used for throttle and reversing operation of the Primal Monster Trucks. It also works great as a throttle and brake servo for the HPI Baja and MCD line of cars. \u003c\/p\u003e\n\u003cp\u003eThis A80BHMW is \u003cstrong\u003ewaterproof IP67\u003c\/strong\u003e rated up to 1 meter which allow driving in the rain, puddles, snow and mud. High reliable and durable patent gear design which can be longer service life. Full aluminun CNC case for fast heat disppation. High precision digital control circuitry.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAGFRC Servos are industry leading performers which makes them a popular choice for OEM sourcing. Skip the markup and get the best servos at the best price.\u003c\/span\u003e\u003c\/p\u003e","brand":"AGFRC","offers":[{"title":"Default Title","offer_id":51660773097653,"sku":"AGFA80BHMWV2","price":86.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/agfrc-A80bhmw-v2-40kg-servo-waterproof-digital-metal-gear.jpg?v=1757023658"},{"product_id":"billet-one-way-fuel-breather-valve","title":"BILLET One-way Fuel Breather Valve","description":"\u003cp\u003eFuel line breather to help prevent fuel starvation from tanks that dont allow air in fast enough for high power RC engines. These premium breather valves are fitted with proper tightly fitting Tygon fuel line ready to be installed in your tank grommet and work much better than generic units. Essential for big bores especially when there is no return line on the carb like the WT71 and WJ146\u003c\/p\u003e","brand":"Detroit Performance RC","offers":[{"title":"BLACK","offer_id":51660773130421,"sku":"DPR1030BK","price":4.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":52255430672565,"sku":null,"price":4.95,"currency_code":"USD","in_stock":true},{"title":"Green","offer_id":52255430705333,"sku":null,"price":4.95,"currency_code":"USD","in_stock":true},{"title":"Yellow\/Orange","offer_id":52255430738101,"sku":null,"price":4.95,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":52255430770869,"sku":null,"price":4.95,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":52255430803637,"sku":null,"price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/BILLETOne-wayFuelBreatherValve.jpg?v=1757023660"},{"product_id":"ram-air-race-filter-for-5th-scale","title":"RAM Air Race Filter for 5th Scale","description":"\u003cp\u003eThis twin layer foam air filter provides the perfect filtration without effecting airflow to your engine, with a rubber polymer neck it is easily clamped into place on the engines intake, allowing maximum airflow at all times.\u003c\/p\u003e\n\u003cp\u003eDetroit Performance RC strongly suggests using an Outerwears Pre-filter. This filter will work with \u003cspan\u003eOTW20-1100\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWith a 43-45mm fitting base this air filter will work on all Taylor RC Velocity stacks, air boxes and other common RC brand velocity stacks.\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660773327029,"sku":"TAY3040","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/RAMAirRaceFilterfor5thScale.jpg?v=1757023662"},{"product_id":"taylor-ram-2-in-cab-exhaust","title":"TAYLOR Ram 2 \"In-Cab\" Exhaust","description":"\u003cp\u003eOur new insanely powerful un-silenced Big Bore exhaust pipe for the Primal 1\/5 Raminator and Mega Monster Trucks! (will fit the grave digger but cage cutting is involved)\u003c\/p\u003e\n\u003cp\u003eThis new design is made totally in house (for the first time in our history) with incredible results, the fitment is perfect even though its an insanely tight squeeze to get into the space available.\u003c\/p\u003e\n\u003cp\u003eThe downside of us hand rolling and fabricating in low volume ourselves, is the price, we have tried really hard to get it as reasonable as we can, but this is over and above the quality, fitment accuracy and strength of any other 1\/5 scale exhaust on the market, i can say that with confidence as we have had them all through our hands at one point or another!!\u003c\/p\u003e\n\u003cp\u003eOur V2 pipe is much larger and longer tuned length than any competitors exhaust systems for big bore raminator applications, meaning much more torque and mid range power. Not the \"peaky\" performance issues you guys have experienced with short exhausts on these huge heavy trucks. A hard hitting peaky powerband tends to mean lots of broken parts as the power comes in all at once. This exhaust follows the trend of our massive V1 pipe, with no descrease in power or size, but all done while fitting inside the body.\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660773916853,"sku":"TAY8063","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_542fb6ff-0ffc-45c4-8414-503e722158a0.jpg?v=1757023688"},{"product_id":"ddm-7000mah-7-4v-lipo-battery","title":"DDM 7000mah 7.4V LIPO Battery","description":"\u003cp\u003eDDM Racing 7000 mAh LiPo receiver battery for the Kraken VEKTA, Losi 5IVE-T\/Mini WRC, TLR 5IVE-B and RCMK XCR line of cars. Increase your run time over the original batteries with power to last. Features flexible 22 awg wire with a JR style servo connector and an XH type balance plug. There are two leads, one made to plug into your on\/off switch and another for charging.\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101mm x 45mm x 28mm\u003c\/li\u003e\n\u003cli\u003e262 grams\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBefore use make sure that your receiver and electronics are LiPo\/high voltage compatible. Use with non-compatible electronics may damage your receiver\/servos. Requires a LiPo battery charger. When not in use for extended periods it is suggested that the battery is placed in \"Storage Mode\" with your LiPo charger.\u003c\/p\u003e","brand":"DDM Racing","offers":[{"title":"Default Title","offer_id":51660775522485,"sku":"DDMBT285","price":63.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/DDM7000mah7.4VLIPOBattery.jpg?v=1757023758"},{"product_id":"taylor-m8-hd-ram-steering-link-mounts","title":"TAYLOR M8 HD RAM Steering Link mounts","description":"\u003cp\u003e\u003cstrong\u003eUPDATED V2 VERSION: Now comes with a Drill, Tap and M8 bolts to change your truck out to a much stronger size fixing point.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis pair of billet HD arms is a permanent solution to worn out stock steering link mounts! Machined to the usual TAYLOR Standards from local 2024.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRunning on dual HD ball bearings for smooth operation and zero wear.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe bearings are pressed with a tight interference fit\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660775686325,"sku":"TAY8010","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/TAYLORM8HDRAMSteeringLinkmounts.jpg?v=1757023771"},{"product_id":"transmission-axle-cvd-grease","title":"Detroit Transmission Axle\/CVD Grease","description":"\u003cp\u003eDetroit Performance RC upgraded axle and transmission grease specially designed for RC cars.   This extra sticky grease is designed to stick and protect gears, CVD’s \u0026amp; dogbones.  It has very high resistance to water and wash out.  Excellent rust and oxidation inhibiting characteristics even at high temps (up to 350 degrees).  Developed to not pound out or splatter under high loads, vibration and shock loading.   2oz Jar \u003c\/p\u003e","brand":"Detroit RC","offers":[{"title":"Default Title","offer_id":51660777685173,"sku":"DPR1020","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/TransmissionAxleCVDGrease.jpg?v=1757023809"},{"product_id":"m8-bolt-upgrade-for-hd-steering-links","title":"M8 Bolt Upgrade for Raminator HD Steering Links","description":"\u003cp\u003eUpgrade your Axles to M8 thread so you can use the supplied M8 bolts to mount your TAYLOR HD Billet Steering Link Mounts\u003c\/p\u003e\n\u003cp\u003eQuick Start Guide:\u003c\/p\u003e\n\u003cp\u003eRemove your steering links\/mounts from the car. Use the Drill Bit supplied to drill the threaded hole out to a bigger size. Then use the Tap supplied to create a larger M8 threaded hole. Clean and refit your steering the larger bolt and washer supplied!\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660777717941,"sku":"TAY8011","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/file_aeb110f2-a00c-4e70-a28c-7797a40df89f.jpg?v=1757023811"},{"product_id":"agfrc-brushless-78kg-billet-servo-a280bhmw","title":"AGFRC Brushless 78KG Billet Servo - A280BHMW","description":"\u003cp\u003e\u003cem\u003eThe most reliable and consistent Servo in 5th Scale is here and at a great price for the quality. This servo is getting rave reviews around the hobby and has been manufacturered to insane specs with premium materials!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a 2S version 1\/5th scale servo with the same dimensions as the popular Hitec D840WP\u0026amp; D845WP, SAVOX SW-0240SG, Hilantronics Hercules and KPower DM4000 etc. Designed to drop straight in your car with no fuss. With a standard servo connector and premium wiring there is no additional need for external voltage sources. We suggest using with a 2S LiPo for the best results.\u003c\/p\u003e\n\u003cp\u003eWhen it gets wet the fun doesn't stop, fully magnetic \u003cstrong\u003ewaterproof IP67 grade\u003c\/strong\u003e allows you to carry on in humid environments and rainy days. 78KG (1084 oz) of torque and a 0.082 second lightning fast transit speed make this a market leader. Ultra light unique design with full CNC case for maximum strength and heat dissipation.\u003cstrong\u003e Supplied with both double and single sided 7075 billet aluminum servo horns.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe A280BHMW combines a long-life \u003cstrong\u003ebrushless\u003c\/strong\u003e motor with monster torque design taking the driving experience to another level. It is ideal for 1\/5th Monster Truck, Buggy, Touring Car, Crawler, Large Airplanes, Robot Arm, etc. Whether you are hitting the track or climbing over sand dunes, 5 ball bearings and \u003cstrong\u003ehigh strength steel gears\u003c\/strong\u003e ensure a reliable performance and long service life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is our number one selling servo in our store\u003c\/strong\u003e and is a top choice steering servo for HPI Baja, Hyrid\/Outlaw builds, MCD, Losi, Kraken, ROVAN\/KM cars. With a standard large scale sized mounting this is can be mounted in all popular large scale models. Upgrading to this servo will ensure reliability and durability in controlling your big 1\/5 RC car.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAGFRC Servos are industry leading performers which makes them a popular choice for OEM sourcing. Skip the markup and get the best servos at the best price.\u003c\/span\u003e\u003c\/p\u003e","brand":"AGFRC","offers":[{"title":"Default Title","offer_id":51660779454645,"sku":"AGFA280BHMW","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/agfrc-a280bhmw-brushless-digital-alumimum-waterproof-servo-78kg.jpg?v=1757023860"},{"product_id":"walbro-winged-fuel-tank-clunk-filter","title":"Walbro Winged Fuel Tank Clunk\/Filter","description":"\u003cp\u003eWalbro \/ Zenoah \"clunk\" style in-tank fuel filter, winged version.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eComes as pictured.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eFits all 1\/8\" size fuel lines.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWalbro Part 125-529-1\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":51660780929205,"sku":"WAL125-529-1","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/WalbroWingedFuelTankClunkFilter.jpg?v=1757023915"},{"product_id":"galante-tow-strap-for-1-5-scale-vehicles","title":"Galante Tow Strap for 1\/5 scale vehicles","description":"\u003cp\u003eGalante Performance RC tow strap. These double stitched straps are made with dual stainless eyelets, 1400lb tensil strength strapping making them the strongest and best looking tow straps on the market. We're so happy to have them in our TAYLOR RC shop.  \u003c\/p\u003e","brand":"Galante","offers":[{"title":"black","offer_id":51660780961973,"sku":"GPR2090BK","price":24.9,"currency_code":"USD","in_stock":false},{"title":"blue","offer_id":51829421703349,"sku":null,"price":24.9,"currency_code":"USD","in_stock":true},{"title":"red","offer_id":51829421736117,"sku":null,"price":24.9,"currency_code":"USD","in_stock":true},{"title":"yellow","offer_id":51829421768885,"sku":null,"price":24.9,"currency_code":"USD","in_stock":true},{"title":"orange","offer_id":51829421801653,"sku":null,"price":24.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/2_23d93349-2bd2-4fac-be07-a854468b0346.jpg?v=1757023917"},{"product_id":"primal-mt-taylor-50gt-package","title":"PRIMAL MT TAYLOR 50GT Package","description":"\u003cp\u003e\u003cstrong\u003ePlease note all Big Block engines are built to order, expect circa 7 - 14 days for shipment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComplete ready to fit package for the PRIMAL RC RAMINATOR, GRAVE DIGGER and MEGA Monster Truck!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis engine will provide you with 3-4 times the power of stock raminator engine but not quite the gear shattering torque of the 80 SUPREME for those concerned about improved drivetrain reliability.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCustom Anodising is available in all colours and even Dual Colour Splash anodising! Please just get in touch after placing an order to discuss.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe package includes the following:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50cc Billet Reed engine (40mm Bore x 39.6mm Stroke)\u003c\/li\u003e\n\u003cli\u003eTAYLOR GT CYLINDER (Insane torque output with staged triple exhaust port)\u003c\/li\u003e\n\u003cli\u003eChoice of Stock Cast head (lower compression and painted black) or Billet head (more torque)\u003c\/li\u003e\n\u003cli\u003e78mm 3-Shoe GO-PED CLUTCH SYSTEM\u003c\/li\u003e\n\u003cli\u003eFits straight onto the stock Ram Clutch bell housing and transmission for easy swap.\u003c\/li\u003e\n\u003cli\u003eOppama Japanese Ignition System\u003c\/li\u003e\n\u003cli\u003eTAYLOR BILLET HD PULL STARTER\u003c\/li\u003e\n\u003cli\u003eTAYLOR Reed System with 8 custom high tension carbon-fibre petals.\u003c\/li\u003e\n\u003cli\u003eFitted as standard with the WJ146 Big bore carb\u003c\/li\u003e\n\u003cli\u003eRAM AIR Dual layer foam filter\u003c\/li\u003e\n\u003cli\u003eTAYLOR BIG BORE RAMINATOR EXHAUST and fitting kit.\u003c\/li\u003e\n\u003cli\u003eCustom Throttle cable linkage bracket\u003c\/li\u003e\n\u003cli\u003eCustom Billet RH and LH engine brackets to replace stock engine brackets.\u003c\/li\u003e\n\u003cli\u003eThe famous TAYLOR Official Hat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 50GT fits almost the same as our 80cc Monster without the need to change the transmission. See install video by \u003ca href=\"https:\/\/youtu.be\/97yjgpOPBf0?si=RkPfiMjNWrV925jL\"\u003eRC Sparks on YouTube\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFitment into the primal raminator is fairly straightforward. Once you have removed the stock engine and pipe, also remove the centre top cross over link bar between the two side chassis plates.\u003c\/p\u003e\n\u003cp\u003eWhile the stock engine is out, we highly recommend cutting out a section of the side chassis plate next to the pull starter so that you can fit the engine (or even the stock engine) Without having to remove the pull starter or remove the side chassis plate itself. (see photo above with section cut out around the pull starter).\u003c\/p\u003e\n\u003cp\u003eThen the engine itself can drop in and bolt up with the supplied engine brackets (fitment shown in pics).\u003c\/p\u003e\n\u003cp\u003eAs mentioned above, if you cut your chassis it will drop in, if not, remove the pull start side chassis plate and then there is room to fit. Fit all the engine mounting bolts supplied. Next you can hook up the throttle linkage cable onto the big bore WJ71 carb. Simply remove the linkage cable hole from the stock carb by popping the bracket off and removing the E clip. Then put this piece onto the Hole cut out in the WJ71 Carb arm as shown in photos.\u003c\/p\u003e\n\u003cp\u003eFinally you can fit the cable to the supplied holder bracket and adjust to suit. (again see photos) The last step is to fit the exhaust mounting bracket to the car ready to support the pipe. (the main belly section of the pipe fits to the car AFTER the body has been fitted - slide in through the gap at back of the roll over bar and into place). Then its as simple as two retaining springs and the one nut on the rubber mount!\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Standard Cast Head \/ V1 Straight Pipe (Grave Digger)","offer_id":51660784697525,"sku":"TAY1403-01","price":1945.0,"currency_code":"USD","in_stock":true},{"title":"Standard Cast Head \/ V2 in-cab Pipe (Ram\/Mega truck etc)","offer_id":51660784730293,"sku":"TAY1403-02","price":1945.0,"currency_code":"USD","in_stock":true},{"title":"Add Billet Head (+75.00) \/ V1 Straight Pipe (Grave Digger)","offer_id":51660784795829,"sku":"TAY1403-04","price":2045.0,"currency_code":"USD","in_stock":true},{"title":"Add Billet Head (+75.00) \/ V2 in-cab Pipe (Ram\/Mega truck etc)","offer_id":51660784828597,"sku":"TAY1403-05","price":2045.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_e0e6a895-022a-42bf-8bce-107f60c3f3d8.jpg?v=1757023997"},{"product_id":"taylor-rc-raminator-exhaust-roll-cage-straight-pipe","title":"TAYLOR RC Raminator Exhaust Roll Cage (straight pipe)","description":"\u003cp\u003eA New replacement Tubular steel Pipe Protection Roll cage for the back of the Raminator Monster Truck. Manufactured with Quality Seamless 10mm Tubing in England\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is our second version, with an extra bracing bar to strengthen from side\/top corner impacts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eComplete with Fitting kit\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660785680565,"sku":"TAY8062","price":112.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_e57b3e3b-df2e-4c31-842b-a550f8b5a95d.jpg?v=1757024019"},{"product_id":"taylor-rc-truck-flag","title":"TAYLOR RC Truck Flag","description":"\u003cp\u003eCustom printed TAYLOR Logo Flag, for decorative purposes you can cable tie to your Rig!\u003cbr\u003e\u003cbr\u003eNot Totally Bash Proof!! They are made onto a plastic pole which has a fair amount of flex but its not indestructible and will surely break in a full on high speed roll over where it takes direct impact\u003c\/p\u003e\n\u003cp\u003eWe supply them for a bit of fun with our RAM engine kits to attach to the back of the monster like a real monster jam truck!\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660787187893,"sku":"TAY8080","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/TAYLORRCTruckFlag.jpg?v=1757024084"},{"product_id":"taylor-approved-hex-tool-tip-set","title":"TAYLOR Approved Hex Tool Tip Set","description":"\u003cp\u003eThis 6pc set contains: \u003cstrong\u003e1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm and 5.0mm\u003c\/strong\u003e extended tool tips or hex bits as i call them. Manufactured by Wera in Germany with premium tool steel that offers a tough core and then extreme surface hardening. The Best Allen Key bits you can buy!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eVery few in 1\/5 scale drive more hexagon screws of any type\/style on a daily basis than myself and my wife here at TAYLOR RC! We are constantly assembling our engine and products, doing custom builds, building and then stripping test rigs for prototypes etc etc.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIve been through almost every brand of hexagon bit and tool tip on the market, within RC and the professional motorsport industry where i come from, to try find bits that can withstand daily use from an 1\/4\" drive impact gun on tiny RC screws without round outs!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eA fairly new product on the market from the premium brand Wera caught my eye 6 months ago and its totally changed my efficiency ever since. Their top of the range \"Hex-Plus\" hexagon impact bits have blown me away, im still running the first set i bought and they show no wear, im talking many thousands of screws with minimal round outs! Totally innovative and superior to all normal hexagon shape bits.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIt would be simply rude of me not to pass on this wicked find to you guys, i managed to hook a sweet deal from Wera due to my passion for their work and put together a set of Tips for your impact guns that will change your RC life!\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660789809333,"sku":"TAY2000","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_483f95a6-35f6-467d-b200-b0fbe0d66f2a.jpg?v=1757024172"},{"product_id":"raminator-front-nudge-bar-bull-bar","title":"JS Primal Monster Truck Alloy Front Nudge Bar \/ Bull Bar","description":"\u003cp\u003eAdd some style to your Monster Truck with our Alloy Bull Bar\/Nudge Bars! Not only do these look the part, they also offer protection in the event of an impact.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eExtremely Heavy Duty! The 5mm side plates provided are powder coated in a chrome finish giving a robust and maintenance free finish, there are three 16mm alloy braces and one 13mm or the upper fitment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAll stainless steel fixing are provided including two bow shackles.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFitting tip: Fit the braces to the end plates first but don’t tighten, remove the three bolts on each side of your chassis securing the stock bumper – simply then fit the side plates to the chassis using the longer bolts provided (do not over tighten!) Tighten the brace bolts and you’re done.\u003c\/p\u003e","brand":"JS Performance","offers":[{"title":"Default Title","offer_id":51660794298549,"sku":"JSP8081","price":188.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/RAMINATORFrontNudgeBarBullBar.jpg?v=1757024282"},{"product_id":"make-your-own-raminator-wheelie-bar","title":"\"Make your own\" Raminator Wheelie Bar","description":"\u003cp\u003eWe have done the hard work in sorting out tight fitting, strong wheelie bar brackets about the correct length for Monster Truck style wheelies. But we realise that some of you guys like to customise your trucks! So here is the chance to buy just the brackets and 10mm wheel shaft so you can make up your own wheelss or even dual wheels like we did on our wheelie bar to suit your taste.   NB: We designed our brackets for our truck running single shocks on each corner. However if your running dual shocks you can run the brackets on the inside of second set of shocks. Just leaves the shocks sitting at a very slight angle.\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660794429621,"sku":"TAY8001","price":62.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/file_fc58f87c-aada-4db7-83ac-0b00218eed7b.jpg?v=1757024287"},{"product_id":"hd-bullet-alloy-wheel-nuts-4pc","title":"HD Bullet Raminator Alloy Wheel Nuts (4pc)","description":"\u003cp\u003eJS Performance “bullet” alloy wheel nuts not only add style and a purposeful look to your Raminator but give your model a hard wearing heavy duty wheel nut alternative. A wider diameter gives more surface area on the wheel, fitting both the standard and extended wheel hex.\u003c\/p\u003e","brand":"JS Performance","offers":[{"title":"Default Title","offer_id":51660794462389,"sku":"JSP8080","price":66.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_a9e85942-a435-4568-9429-9973ce2d1562.jpg?v=1757024289"},{"product_id":"heavy-duty-22mm-wheel-extenders-4pc","title":"Raminator Stainless HD 24mm Wheel Extenders (4pc)","description":"\u003cp\u003eMachined from stainless steel, these bullet proof wheel extenders give a wider stance, an increase in stability and handling for your Primal Raminator MT. Sold as a set of four complete with 4mm cross section pin retaining O-rings.\u003c\/p\u003e","brand":"JS Performance","offers":[{"title":"Default Title","offer_id":51660794495157,"sku":"JSP8071","price":73.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_c102ed6c-9f40-432c-88c1-c6fd5f36101a.jpg?v=1757024291"},{"product_id":"taylor-primal-raminator-grave-digger-wheelie-bar","title":"TAYLOR Primal Raminator\/Grave Digger Wheelie Bar","description":"\u003cp\u003eNow fits the Grave Digger also\u003c\/p\u003e\n\u003cp\u003eDeveloped during the testing of our new 80 Supreme engine package for the Raminator, we are pleased to release this HD wheelie bar for the Primal MT Featuring 5mm HD stainless support brackets, then two 1\/8 scale RC Wheels joined together with a billet centre shaft, rotating on a Hard steel bolt for durability. Naturally the 1\/8 wheels can be changed out to other brand\/designs if you remove the bonding agent joining together for different designs!This wheelie bar was designed on our car running single shocks on each corner, if you run dual shocks, then the bracket fits on the inside of second set of shocks. Just leaves the shocks sitting at a very slight angle.\u003c\/p\u003e","brand":"Taylor RC","offers":[{"title":"Default Title","offer_id":51660795510965,"sku":"TAY8002","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/tay8002-primal-monster-truck-wheelie-bar.jpg?v=1757024314"},{"product_id":"js-performance-spiked-shock-nuts-set-4pcs","title":"JS Performance Spiked Shock Nuts Set - 4pcs","description":"\u003cp\u003eA set of 4x M6 Billet Spike style shock retension nuts from JS\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e(if you are running the dual shock on each corner upgrade kit on your MT, you will need two packs for all 8 shocks)\u003c\/p\u003e","brand":"JS Performance","offers":[{"title":"Default Title","offer_id":51660795740341,"sku":"JSP5015","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/JSPerformanceSpikedShockNutsSet-4pcs.jpg?v=1757024326"},{"product_id":"primal-mt-taylor-80-supreme-package","title":"PRIMAL MT Taylor 80 V2 Supreme Billet Reed Engine Package","description":"\u003cdiv id=\"shopify-section-template--17281984757994__details\" class=\"shopify-section cc-product-details product-details section\"\u003e\n\u003cdiv class=\"container reading-width\"\u003e\n\u003cdiv class=\"product-details__block\"\u003e\n\u003cdiv id=\"panel-0\" role=\"tabpanel\" aria-labelledby=\"tab-0\" tabindex=\"0\"\u003e\n\u003cdiv class=\"rte product-description\"\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note all Big Block engines are built to order, expect circa 7 - 14 days for shipment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eComplete ready to fit package for the PRIMAL RC RAMINATOR, Grave Digger and MEGA Monster Truck!\u003c\/p\u003e\n\u003cp\u003eCustom Anodising is available in all colours and even Dual Colour Splash anodising! Please just get in touch after placing an order to discuss.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eThe package includes the following:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e80cc Billet Reed engine\u003c\/li\u003e\n\u003cli\u003eCustom made lightweight full circle crankshaft\u003c\/li\u003e\n\u003cli\u003eTAYOR SUPREME V2 CYLINDER\u003c\/li\u003e\n\u003cli\u003eSUPREME BILLET CYLINDER HEAD\u003c\/li\u003e\n\u003cli\u003e7500rpm 78mm Clutch System\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eV2 Oppama high rpm ignition system\u003c\/li\u003e\n\u003cli\u003eTAYLOR BILLET HD PULL STARTER\u003c\/li\u003e\n\u003cli\u003eTAYLOR\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/taylorrc.co.uk\/products\/taylor-billet-high-rpm-reed-valve\" title=\"Taylor RC Billet High RPM Reed Valve\" rel=\"noopener\" target=\"_blank\"\u003eBillet High RPM Reed Valve\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewith Carbon Fiber Petals\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWalbro WJ146 Carb\u003c\/li\u003e\n\u003cli\u003eRAM AIR Dual layer foam filter\u003c\/li\u003e\n\u003cli\u003eTAYLOR BIG BORE Monster Truck EXHAUST and fitting kit.\u003c\/li\u003e\n\u003cli\u003eCustom Throttle cable linkage bracket\u003c\/li\u003e\n\u003cli\u003eCustom Billet RH and LH engine brackets to replace stock engine brackets.\u003c\/li\u003e\n\u003cli\u003eThe famous TAYLOR Official Hat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFitment into the primal raminator is fairly straightforward. Once you have removed the stock engine and pipe, also remove the centre top cross over link bar between the two side chassis plates.\u003c\/p\u003e\n\u003cp\u003eWhile the stock engine is out, we highly recommend cutting out a section of the side chassis plate next to the pull starter so that you can fit the engine (or even the stock engine) Without having to remove the pull starter or remove the side chassis plate itself. (see photo above with section cut out around the pull starter).\u003c\/p\u003e\n\u003cp\u003eNext you can hook up the throttle linkage cable onto the big bore WJ71 carb. Simply remove the linkage cable hole from the stock carb by popping the bracket off and removing the E clip. Then put this piece onto the Hole cut out in the WJ71 Carb arm as shown in photos.\u003c\/p\u003e\n\u003cp\u003eFinally you can fit the cable to the supplied holder bracket and adjust to suit. (again see photos) The last step is to fit the exhaust mounting bracket to the car ready to support the pipe. (the main belly section of the pipe fits to the car AFTER the body has been fitted - slide in through the gap at back of the roll over bar and into place). Then its as simple as two retaining springs and the one nut on the rubber mount!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Taylor RC","offers":[{"title":"V1 Straight Exhaust (suits silencer)","offer_id":51660795838645,"sku":"TAY1904-01","price":2549.0,"currency_code":"USD","in_stock":true},{"title":"V2 In-Cab Exhaust","offer_id":51660795871413,"sku":"TAY1904-02","price":2549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/taylor-rc-primal-monster-truck-supreme-80cc-reed-case-billet-engine.webp?v=1762871289"},{"product_id":"js-raminator-alloy-fuel-tank","title":"JS Primal Monster Truck Alloy Fuel Tank","description":"\u003cp\u003eA simple stunning piece of metal work from JS performance!\u003cbr\u003e\u003cbr\u003eThis tank is a huge bling upgrade over the stock plastic tank plus has a nice side benefit of moving the filler cap over to the Right hand side which makes it easy to refuel even with an RCMAX 80 Supreme engine and exhaust fitted!\u003c\/p\u003e","brand":"JS Performance","offers":[{"title":"Default Title","offer_id":51660795936949,"sku":"JSP8030","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/files\/1_8591842a-d5f9-4726-bcc3-dea9233de0d8.jpg?v=1757024334"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/6937\/3621\/collections\/prmtr4-02-768x576.webp?v=1783529294","url":"https:\/\/www.detroitperformancerc.com\/collections\/primal-monster-truck.oembed?page=2","provider":"Detroit Performance RC","version":"1.0","type":"link"}