The RCMAX 71 is a legendary engine in our range, proven over many years and recently taken to the next level with our Game Changing Supreme Cylinder! 

    This Complete 71 Dragster engine package comes with everything you need to fit the billet
    reed engine into your car and get down the track! This engine is for experienced users only and comes with our Monster 110mm clutch system, custom gear plate and gears plus all new fitting brackets to replace the stock ones on both sides of the car!


    Fitment mods needed to the car:

    • You will have to throw away your plastic dragster cockpit cage due to the sheer size of the engine!
    • A small piece of dremel work is needed to the brake mount and top tranny plate as shown in the photos before and after pics. This is to accept the monster 110mm clutch

    The WJ71 carb will come preset on rich settings ready for bedding-in the engine while you get
    used to the massive increase in Horsepower and torque. You will be supplied a free Yamadude linkage set so you can make up your linkage similar (or better!) than we have done as an example in the photos.


    71 SUPREME 110mm Clutch Dragster Package Spec list:

    • 71cc Billet Reed Engine
    • RCMAX Custom SUPREME Cylinder.
    • RCMAX Custom made lightweight full circle crankshaft.
    • RCMAX TITANIUM Dragster Fitment Side Pipe.
    • RCMK High-rpm ignition system.
    • RCMAX V Force Reed System with 8 custom high tension carbon-fibre petals.
    • Mod WJ71 Carb
    • Ram Air Dual layer Air Filter
    • THE INSANE New 110mm Clutch system
    • RCMAX Billet 7075 110mm Gear back plate
    • BLACKBONE HD gears for 110mm clutch (88 Tooth count total)
    • Custom Primal Dragster LH Engine brace from 4mm stainless steel to brace against the torque.
    • Custom Primal Dragster RH Engine brace from 4mm stainless steel to brace against the torque.
    • Custom Billet Rear engine bracket which replaces the stock mount.
    • The famous RCMAX Official Hat
    • Spark plug spanner
    • Yamadude linkage


    NB. Fitment into the Dragster is straight forwarded once you carry out the mods mentioned above, we provide all the required fitment brackets to replace the ones which suit the stock engine. The pipe attaches via supplied bracket to two existing threaded holes in the side rail of the car. 

    Custom Anodising is available in all colours and even Dual Colour Splash anodising! Please just get in touch after placing an order to discuss.